Metal Roofing Orange County
A metal roof outlasts every other material we install on Orange County homes. Because of that, more owners now ask about metal roofing Orange County crews can fit to a tile or shingle house. We install standing seam, metal shingle, and stone coated steel systems. Call (949) 561-2069 for a free inspection.
Why metal holds up here
Orange County gives a roof three problems at once. Coastal salt air corrodes fasteners, inland sun bakes underlayment, and Santa Ana winds lift anything loose. Metal handles all three better than most materials. Because the panels interlock and the fasteners sit under the seam, wind finds very little to grab.
A metal roof also reflects heat instead of holding it. As a result, attics run cooler through August, and your air conditioner cycles less often. Most metal roofing Orange County homeowners choose today carries a cool roof rating, which matters for Title 24. We cover that rule further down this page.
Metal roofing systems we install
No single system suits every house. A hillside home in Laguna Niguel and a modern build in Irvine call for different panels. So we start with your roof pitch, your exposure, and the look you want. Then we match the system to it.
Standing seam metal roof
A standing seam metal roof runs vertical panels from ridge to eave, joined by raised seams. The fasteners sit under those seams, hidden from rain and sun. Because nothing pierces the panel face, this system leaks the least and lasts the longest. Snap lock panels click together on site, which speeds up a residential install. Standing seam also appears on many commercial roofing buildings across the county.
Metal shingles and metal shingle roofs
Metal shingles copy the look of slate, wood shake, or asphalt shingle roofing, and they lock together in panels. Owners often pick them for tracts where a standing seam roof would stand out. A metal shingle roof carries the same lifespan as a panel system. Meanwhile, it keeps the profile your neighbors expect.
Panel profiles that suit Orange County streets
Looks matter as much as performance on a residential street. Metal roofing Orange County homes wear well only when the profile fits the neighborhood. So these three options copy materials already around you. Each one carries the same weather performance as a flat panel system.
Corrugated and ribbed metal roofing
Corrugated metal roofing uses wavy panels fixed through the face with exposed fasteners. Ribbed metal roofing works the same way, with straight raised lines instead of curves. Both install faster than standing seam. However, the exposed fasteners need checking every few years, because the washers harden and shrink over time.
Stone coated steel roofing
Stone coated steel roofing carries a layer of crushed stone fused to the surface. From the street it reads as tile or shake, yet it weighs far less. For that reason, it suits homes moving off tile roofing without the framing to carry more weight. It also holds a Class A fire rating, which matters in the canyon fire zones.
Metal tile roof and aluminum panels
A metal tile roof presses the barrel profile straight into the panel, so a Spanish street stays consistent. Aluminum roofing does not rust, which matters in Huntington Beach and anywhere within a mile of the water. Galvalume roofing coats steel with aluminum and zinc, and it holds up well near the coast too. Inland, coated steel performs just as long.
Exposed fastener or concealed fastener
The fastener type decides how your roof ages. An exposed fastener metal roof screws through the panel face, which makes it quick to install and easy on the budget. A concealed fastener metal roof hides every screw under the seam. Because no rubber washer sits in the sun, that system needs far less attention over thirty years.
Metal roof gauge matters just as much. Lower gauge numbers mean thicker steel, so a 24 gauge panel resists denting better than a 29 gauge panel. We recommend the gauge that fits your pitch and your exposure. Then we show you samples before you decide anything.
Our metal roofing Orange County installation process
Every metal roofing Orange County project follows the same order. First, we run a free roof inspection of the deck, the framing, and the existing layers. Next, we pull the permit and book the tear off inspection with your city. Then the crew works from the deck up.
Metal roof underlayment does more work here than on a shingle roof. Panels expand and move with temperature, so the layer beneath them takes the abrasion. For that reason, we use a high temperature synthetic underlayment on every metal install. Flashing then seals the valleys, the sidewalls, and every penetration.
Owners often ask whether a metal roof over shingles saves time. Sometimes it does, and many cities allow one layer underneath. Still, we usually recommend a full tear off, because a soft spot in the deck will not fix itself. Our roof replacement page explains how we make that call.
Metal roofing and Title 24
California Title 24 sets energy rules for most re-roofs, and Orange County cities check them at final inspection. Cool roof metal roofing meets the standard easily, because factory finishes reflect a large share of the sunlight that lands on them. Inland neighborhoods feel the benefit most, since attic temperatures climb highest there.
A reflective panel only works with the rest of the system. Attic airflow and roof insulation carry the heat that does get through, and proper roof ventilation finishes the job. So we check all three during the estimate. A cool panel over a sealed attic wastes half its value.
Metal roofing Orange County care and repair
A metal roof asks for little, yet it still asks for something. We check the fasteners, the sealant at the flashing, and the panel ends. Scheduled roof maintenance catches a lifted seam long before water reaches the deck. If a panel opens up after a storm, our storm damage repair crew handles it.
Leaks on metal almost always start at a penetration, not in the middle of a panel. Because of that, our roof leak repair work begins at the vents, the skylights, and the chimney. A roof coating can also extend the life of an older panel roof. Our metal roof repair service covers the rest.
Sometimes water will not wait for a scheduled visit. When a panel tears loose overnight, our emergency roof repair team responds and makes the roof safe. After that, we plan the permanent fix in daylight. General roof repair work across the county follows the same order.
Why owners across Orange County choose OC Roof Kings
Why homeowners choose us
Family-owned and operated. Licensed and insured. More than 20 years.
Lic. #600662
California Contractor License
5 stars on Google
Local homeowners rate us there
More than 20 years
Standing seam, metal shingle, and stone coated steel
Written warranty
Every install carries one on paper
Metal roofing across Orange County. Call (949) 561-2069.
We also handle residential roofing and every material behind it, so a metal system never sits outside our normal work. You can browse the full list of roofing services we offer. Then check the communities we cover across Orange County.
Frequently Asked Questions
Upfront outlay, and denting on thin panels. A metal roof asks for more at the start than asphalt, so the value shows up across decades rather than years. Thin panels can also dent under heavy hail or a dropped branch. A heavier gauge and a careful install remove most of that risk.
A properly installed metal roof lasts 40 to 70 years in this climate. Standing seam sits at the top of that range, because nothing pierces the panel face. Exposed fastener systems last well too, though the washers need replacing along the way. Orange County sun usually ages the finish before it ages the metal.
Sometimes, and many Orange County cities allow one existing layer underneath. Still, we inspect the deck first, because a metal panel hides everything below it for decades. If the deck is sound and the framing runs straight, a layover can work. Otherwise we tear off and start clean.
Not on a finished home. Rain noise comes from metal fitted over open framing, such as a barn or a patio cover. On a house, the solid deck, the underlayment, and the attic insulation absorb the sound. Homeowners usually notice no difference at all after a storm.
Modern panels carry factory coatings that hold off corrosion for decades. Near the water, salt air still works harder on steel, so we lean toward aluminum or galvalume there. Inland, coated steel performs well for the life of the roof. We match the metal to your distance from the coast.
Book a free metal roofing Orange County estimate
If your roof is nearing the end and you want the last one you will buy, metal deserves a look. Call OC Roof Kings at (949) 561-2069 or email info@ocroofkings.com to book a free inspection. We serve owners across the county, and newer tracts take a standing seam panel especially well.
